Table of Contents
Small boiling granulation dryer for laboratory Working principle
Put the powdery material into the fluidized bed,the cold air enters the rear heating chamber through the primary and medium-efficiency filters, and is heated by the heater to the required temperature of the inlet air and then enters the fluidized bed. Fluidized inside. The binder for granulation is sent to the two-fluid atomizer by the infusion pump. After atomization, it is sprayed to the fluidized material. The powders bridge each other and aggregate into granules and grow up.
Features of the Small boiling granulation dryer for laboratory
(1) The powder is granulated to improve fluidity and reduce dust flying.
(2) The heavy weight method is used for granulation, which can carry out heavy and light weight granulation.
(3) Mixing-granulating-drying one-step granulation
(4) Double-capture filter bag system, clean dust thoroughly.
(5) The multi-fluid atomizer ensures uniform granulation and extremely low powder content.
(6) GMP standard design, manufacture and engineering configuration layout.
